Description:
Two thermostats in one casing:
Thermostat(contact breaker, normally closed)for regulating heaters.
Thermostat(contact maker, normally open)for regulating filter fans and heat
exchangers or switching signal devices when temperature limit has been exceeded. Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts.
Features:
1. NO and NC in one casing
2. Separate adjustable temperatures
3. High switching capacity
4. Terminals easily accessible
5. Clip fixing
Technical data
| Switch temperature difference | 7K(±4Ktolerance) |
| Sensor element | Thermostatic bimetal |
| Contact type | Snap-action contact |
| Contact resistance | ＜10mΩ |
| Service life | ＞100 000 cycles |
| Min switching capacity | 20V AC/DC 100mA |
| Max switching capacity | 250VAC, 10(2)A |
| 120VAC, 15(2)A | |
| DC 30W | |
| EMC | acc to EN55014-1-2、EN61000-3-2、EN61000-3-3 |
| Connection | 4-pole terminal. clamping torque 0.5Nm max. |
| Mounting | clip for 35mm DIN rail,EN50022 |
| Casing | plastic according to UL94V-0,light grey |
| Dimensions | 67×50×46mm |
| Weight | approx. 90g |
| Fitting position | variable |
| Operating/Storage temperature | －45 to＋80℃（-49 to＋176℉） |
| Protection type | IP20 |
